Tag Archives: Mold Tips

Winter Mold Prevention Tips

Posted on by
Are Mold Allergies More Prevalent in the Winter?

Are Mold Allergies More Prevalent in the Winter?

When it comes to NYC mold removal, there’s no off-season. Winter dampness plus less ventilation equals prime conditions for mold spores to grow and multiply. Use these helpful tips to keep indoor mold infestations at bay during the winter months.

Tips to Prevent Winter Mold Growth

• Keep air circulating, especially in kitchens and bathrooms where mold growth is common. Install and use ventilation fans and open a window briefly as needed.

• Inspect the basement for cracked or damaged mortar that can allow water to seep in.

• If your home has a crawlspace, spread heavy roofing paper or polyethylene plastic film over the soil to create a moisture barrier.

• Add insulation to pipes to prevent cracking or bursting. If a pipe does break, turn off the water flow and have it repaired immediately.

• Double-check door and window seals to make sure they’re in good condition.

• Condensation on doors, windows and walls is a red flag indicating excess moisture. Dry the area thoroughly and address the source of the dampness, whether it’s broken pipes or high humidity levels.

• If your home experiences flooding, disconnect all electronic equipment and remove as much standing water as possible.

• Dispose of moldy items in a sealed bag to prevent mold spores from dispersing.

Effective NYC Mold Removal for All Seasons

Cleaning mold is only part of the solution. Stern Mold uses MoldExterm, a unique two-step program that removes mold and prevents it from returning. Contact us to schedule a free mold inspection and learn more about MoldExterm.

Posted in Mold Remediation, Mold Tips, News

How Do Mold Spores Get in the Air?

Posted on by
How Do Mold Spores Get in the Air?

How Do Mold Spores Get in the Air?

Mold spores pose a double threat to homes and businesses. Spores are the vehicles by which mold grows and colonizes as well as the trigger for allergic reactions. Here’s a look at how mold spores get in the air and why controlling spores is important for Manhattan mold removal.

Mold Spores Are Everywhere

While mold spores aren’t visible to the naked eye, they constantly surround us indoors and out. Outdoor spores aren’t generally a cause for concern except during summer months, but prolonged exposure to indoor spores can pose a health risk any  time of year.

Controlling Mold Spore Levels

It’s not possible to eliminate all indoor mold spores. Since mold growth generates more spores, preventing infestations will keep spores at a manageable level.

Moisture is key to mold growth. Once a spore lands on a spot of moisture, it begins reproducing immediately. Be proactive by repairing leaks, cleaning up floods and spills and reducing the amount of humidity.

If you do find mold in your home or business, cleaning it up is only part of the solution. Determine what created the conditions for mold development, such as a leaky pipe or poor ventilation, and take appropriate steps to correct the problem.

Turn to Stern Mold for Safe and Effective Manhattan Mold Removal

Put an end to mold with our two-step MoldExterm program which removes infestations and leaves a barrier to prevent reoccurrences. Contact Stern Mold today for a free inspection by our cheerful and experienced Manhattan mold removal experts.

Posted in Mold & Your Health, Mold Information, Mold Tips, News

How Do You Reduce Mold Spores in the Air?

Posted on by
Are Mold Spores in the Air of Your Home?

Are Mold Spores in the Air of Your Home?

Microscopic mold spores are constantly floating in the air, making mold infestations an ever-present threat. Our NYC mold removal experts offer helpful tips on reducing mold spores as well as excess moisture enabling their growth.

Tips to Reduce Mold Spores and Excess Moisture

• Mold colonies generate mold spores. Use a mold removal product to eliminate visual signs of infestation. If the affected area is more than a small patch, contact our NYC mold removal team for effective elimination.

• Install air purifiers with HEPA filters capable of capturing more than 99 percent of particles. Place one in each room of your home for maximum results.

• Add HEPA filters to air conditioners and windows to keep external mold spores from entering your home.

• Basements, kitchens and bathrooms are the areas most vulnerable to mold. Keep these rooms as dry as possible, making sure they’re well-ventilated. Check regularly for broken or leaky pipes and repair them immediately.

• Leaves and other debris accumulating in gutters can lead to mold being carried into your home. Clean and inspect gutters often, especially after rainstorms.

• Use dehumidifiers to reduce moisture content in the air. Set the dehumidifiers at 50 percent or lower.

• Place wet clothing and shoes outdoors to dry. Leave them in an area with good circulation and check for mold before bringing the items back indoors.

Two-Step NYC Mold Removal from Stern Mold

Our MoldExterm program efficiently removes mold and seals surfaces to prevent future growth. Contact us to schedule a free mold inspection.

Posted in Mold Remediation, MoldExterm, News

Five Things the EPA Wants You To Know About Mold – Part One

Posted on by
Mold Information from the EPA

Mold Information from the EPA

Awareness about the need for Manhattan mold removal has grown, but how do you separate fact from fiction? Let the Environmental Protection Agency (EPA) remove some of the confusion with this informative list of things you should know about mold.

Five Facts About Interior Mold

1. With mold spores constantly circulating throughout indoor air, it’s impossible to eliminate all exposure. Moisture is the key element for mold growth, so the practical solution is to limit its development by controlling high humidity levels, leaky pipes and other sources of interior dampness.

2. Mold remediation is a two-step process. You must clean up all all visible signs of infestation and reduce excess moisture.

3. If you find any leaks or flooding in your home or building, repair the problem immediately.

4. Poor air circulation can lead to excessive levels of humidity.

Ways to control humidity include:

* Installing proper ventilation for bathrooms, clothes dryers and other sources of moisture

* Regular use of air conditioners and dehumidifiers

* Using exhaust fans in the kitchen

5. Prolonged exposure to mold carries a health risk, especially for children, the elderly and people with pre-existing respiratory or immune conditions. Primary symptoms are upper respiratory allergic reactions such as sneezing, coughing and irritated eyes.

Prompt and Effective Manhattan Mold Removal

Our proprietary MoldExterm program uses eco-friendly, non-intrusive methods to remove mold infestations and prevent future growth. Contact Stern Mold to schedule an inspection and treatment recommendation from our friendly Manhattan mold removal experts.

 

Posted in Mold Information, NJ Mold Removal, NYC Mold Removal

Mold in Commercial Buildings – What to Know to Be Safe

Posted on by
Prevent Mold in Commercial Buildings

Prevent Mold in Commercial Buildings

Mold species are virtually everywhere, and the majority of them are not toxic to humans. But there are some that can cause serious health issues. In the home, it’s much easier to keep mold in check, but that’s not the same for the workplace. Many employers find it once it has seriously progressed, and when it reaches that point, NYC mold removal is needed.

But in the meantime, there’s a lot you can do to keep yourself safe if your office is a place where mold is a serious problem.

Avoid Spaces with Humid Air

Humidity is the perfect breeding environment for mold. During the spring and summer, there may be some rooms at your workplace where mold thrives. Try to avoid these spaces if at all possible. Also, if you find a leak, report it right away. They can lead to mold problems as well.

Keep the Refrigerator Clean

Mold can, and often does grow on leftover or older foods that may be forgotten in your office’s refrigerator. If you want to cut down on mold exposure, make it your job to clean it out at least once every month.

Use Protective Equipment

Safety glasses and face masks can be very helpful if you have to be in a place where mold is a problem. You can develop health issues from mold even if you’ve never had them in the past. It’s important to protect yourself.

Are you looking for NYC mold removal services? Contact us today!

Posted in Mold & Your Health, Mold Identification, Mold Law
« Older Entries Recent Entries »